

APPLICATION
YOKKI 5W-30 SM ILSAC GF-4 - high-quality motor oil developed on the basis of highly-purified Group III base oils with lowered volatility and synthetic components. This oil is produced for gasoline and diesel passenger cars and light trucks engines, including latest European and Japanese vehicles. This oil fully meets «EURO 4» and «Mid SAPS» requirements. Also YOKKI 5W-30 SM ILSAC GF-4 meets the highest API ILSAC GF-4 and, in addition, reduces fuel consumption by 2, 5%.
YOKKI 5W-30 SM ILSAC GF-4 is recommended for all types of diesel automobiles and light trucks with and without turbocharging where lower oil consumption and ultimate engine protection are required.
Low temperature viscosity properties of YOKKI 5W-30 SM ILSAC GF-4 make it especially suitable for different climatic zones: from hot up to cold ones.
ADVANTAGES
YOKKI 5W-30 SM ILSAC GF-4 provides easy cold start and excellent lubrication under all operating temperature conditions, that allows increasing the engine operating life.
CHARACTERISTICS
YOKKI 5W-30 SM ILSAC GF-4 is characterized by splendid low temperature features providing easy cold start and excellent lubrication even under heavy frost conditions. Low oil viscosity conduces to rapid oil pressure rise even under very low temperature conditions. It guarantees lubrication of the most sensitive parts of the engine and maximal wear reduction. The set of detergent additives is developed in order to prevent deposit formation on working surfaces of the engine. It provides cleanliness and therefore, long operating life of the engine and for example, turbo compressor. Besides, YOKKI 5W-30 SM ILSAC GF-4 increases new generation catalytic agents life.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 5W-30 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,860 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,850 |
ASTM Color | ASTM D1500 | <2.5 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 66.4 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 11.3 |
Viscosity index | ASTM D2270 | 164 | |
Alkalinity | ASTM D2896 | mgKOH/g | 7.6 |
Open-cup flash point | ASTM D92 | °C | 212 |
Flow point | ASTM D97 | °C | -36 |
Specifications and approvals
- API SL/CF
- JASO MA
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI 5W-40 SM ILSAC GF-4 – full synthetic engine oil developed to meet the latest automobile manufacturers requirements. It is suitable for gasoline and diesel engines. This oil fully meets «Euro 4» and «Mid SAPS» requirements.
YOKKI 5W-40 SM ILSAC GF-4 is recommended for diesel automobiles and light trucks with and without turbocharging where lower oil consumption and ultimate engine protection are required. Low temperature viscosity properties of YOKKI 5W-40 SM ILSAC GF-4 make it especially suitable for different climatic zones: from hot up to cold ones.
ADVANTAGES
YOKKI 5W-40 SM ILSAC GF-4 provides easy engine start under all operating temperature conditions. It allows increasing operating life of the engine.
CHARACTERISTICS
YOKKI 5W-40 SM ILSAC GF-4 is characterized by splendid low temperature features providing easy start and good lubrication of the engine even under heavy frost conditions. Low viscosity conduces to rapid rise of oil pressure even under very low temperature conditions. It guarantees excellent lubrication of the most sensitive parts of the engine and high wear reduction. Due to the synthetic base and specially developed additives set YOKKI 5W-40 SM ILSAC GF-4 keeps its excellent lubricating properties to protect the engine under extreme conditions. The set of detergent additives is developed in order to prevent deposit formation on working surfaces of the engine. It guarantees clean engine and increased operating life of both engine and for example, turbo compressor. YOKKI 5W-40 SM ILSAC GF-4 is created in order to increase new generation catalytic agents life and prolong special "Mid SAPS" system filter operating.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 5W-40 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,851 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,842 |
ASTM Color | ASTM D1500 | <2.5 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 88.9 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 14.2 |
Viscosity index | ASTM D2270 | 165 | |
Alkalinity | ASTM D2896 | mgKOH/g | 7.4 |
Open-cup flash point | ASTM D92 | °C | 212 |
Flow point | ASTM D97 | °C | -42 |
Specifications and approvals
API SM /CF ACEA C3/А3/В3/В4
MB 229.51, BMW LL-04,
VW 502.00 / 505.00/505.01,
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI 10W-30 SL - high-quality mineral engine oil developed on the basis of highly-purified base oils. Created specially for gasoline and diesel engines of automobiles and light trucks. It is perfectly suitable for most of European and Japanese automobiles.
YOKKI 10W-30 SL is recommended for all types of diesel automobiles and light trucks with and without turbocharging where lower oil consumption and ultimate engine protection are required.
ADVANTAGES
YOKKI 10W-30 SL provides easy cold engine start at cold time of the year and excellent lubrication under all operating temperature conditions. It allows increasing the operating life of the engine. Low temperature viscosity properties of YOKKI 10W-30 SL make it especially suitable for different climatic zones.
CHARACTERISTICS
YOKKI 10W-30 SL is characterized by splendid low temperature features providing easy start and good lubrication of the engine even under heavy frost conditions. The product guarantees excellent lubrication of the most sensitive parts of the engine and high wear reduction. The set of detergent additives is developed in order to prevent sediments formation on engine surfaces; the oil provides cleanliness of the motor and therefore, long operating life of the engine and for example, turbo compressor.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 10W-30 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,865 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,856 |
ASTM Color | ASTM D1500 | <3.0 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 70.9 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 11.2 |
Viscosity index | ASTM D2270 | 150 | |
Alkalinity | ASTM D2896 | mgKOH/g | 7.6 |
Open-cup flash point | ASTM D92 | °C | 220 |
Flow point | ASTM D97 | °C | -30 |
Specifications and approvals
- API SL/CF
- JASO MA
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI 10W-30 CF - is a high-quality mineral engine oil specially developed for diesel engines with and without turbocharging. This product is perfectly suitable for the latest diesel engines of most of Japanese and European automobiles and light trucks.
YOKKI 10W-30 CF is recommended for diesel automobiles and light trucks with and without turbocharging where lower oil consumption and ultimate engine protection are required. Low temperature viscous properties of YOKKI 10W-30 CF make it especially suitable for different climatic zones.
ADVANTAGES
YOKKI 10W-30 CF provides easy cold start and excellent lubrication under all operating temperature conditions that allows increasing the operating life of the engine.
CHARACTERISTICS
YOKKI 10W-30 CF is characterized by splendid low temperature features providing easy start and good lubrication of the engine even under low temperature conditions. Low viscosity provides rapid rise of oil pressure even under heavy frost conditions that guarantees lubrication of the most sensitive parts of the engine and therefore, high wear reduction. The set of detergent additives is developed in order to prevent deposit formation on working surfaces of the engine providing by that cleanliness of the engine and its longer life. It goes not only about engines, but also turbo compressors.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 10W-30 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,867 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,857 |
ASTM Color | ASTM D1500 | <3.0 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 72.1 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 11.4 |
Viscosity index | ASTM D2270 | 151 | |
Alkalinity | ASTM D2896 | mgKOH/g | 7.6 |
Open-cup flash point | ASTM D92 | °C | 220 |
Flow point | ASTM D97 | °C | -30 |
Specifications and approvals
- API CF API SJ
- ACEA E2-96 Issue 5 ACEA A2-96/B2-98
- MB 228.1 MB 229.1 Volvo VDS
- MAN 271 MTU Level 1
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI 10W-40 CF - high-quality synthetic blend motor oil specially developed for diesel engines with and without turbocharging. This oil is perfectly suitable for the latest Japanese and European diesel automobiles and light tricks engines.
YOKKI 10W-40 CF is recommended for diesel automobiles and light trucks with and without turbocharging where the lower oil consumption and ultimate engine protection are required. Low temperature viscosity properties of YOKKI 10W-40 CF make it especially suitable for different climatic zones from hot up to cold ones.
ADVANTAGES
YOKKI 10W-40 CF provides excellent lubrication under all operating temperature conditions. It stands for easy cold start and guarantees longer operating life of the engine.
CHARACTERISTICS
YOKKI 10W-40 CF is characterized by splendid low temperature features. The oil provides easy cold start and excellent lubrication. Low viscosity conduces to rapid rise of oil pressure even under very low temperature conditions. It guarantees perfect lubrication of the most sensitive parts of the engine and maximum wear reduction. The set of detergent additives is developed in order to prevent deposit formation on working surfaces of the engine. It provides cleanliness and therefore, long operating life of the engine and for example, turbo compressor.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 10W-40 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,860 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,850 |
ASTM Color | ASTM D1500 | <3.0 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 65.6 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 11.0 |
Viscosity index | ASTM D2270 | 160 | |
Alkalinity | ASTM D2896 | mgKOH/g | 7.6 |
Open-cup flash point | ASTM D92 | °C | 210 |
Flow point | ASTM D97 | °C | -36 |
Specifications and approvals
- API CF API SJ
- ACEA E2-96 Issue 5 ACEA A2-96/B2-98
- MB 228.1 MB 229.1 Volvo VDS
- MAN 271 MTU Level 1
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI 10W-40 CI-4 -high-quality synthetic blend motor oil specially developed for SHPD type diesel engines with or without turborcharging. This engine oil is used for overload heavy duty diesel engines under extreme conditions. Meets expanded oil drain interval.
YOKKI 10W-40 CI-4 fulfills the most rigid requirements of engine manufacturers. This oil provides excellent engine lubrication under all operating conditions. Low volatility of the product guarantees no silicate dropout or gel formation during use.
Low-temperature viscosity properties of YOKKI 10W-40 CI-4 make it especially suitable for different climatic zones.
ADVANTAGES
YOKKI 10W-40 CI-4 provides excellent lubrication over a wide range of temperatures; it stands for easy cold start and therefore, extended operating life of the engine. This oil is excellent for different types of engines in a mixed fleet. Thanks to the outstanding carbon black diffusibility, it is especially recommended for EGR, DPF and CSR engines.
CHARACTERISTICS
YOKKI 10W-40 CI-4 is characterized by splendid low-temperature features. This oil guarantees easy cold start and improved post start-up protection of the engine. Low oil viscosity conduces to rapid rise of pressure that guarantees excellent lubrication of the most sensitive parts of the engine and minimal wear reduction. The set of detergent additives is developed in order to prevent deposit formation on working surfaces of the engine. It provides cleanliness and thus, long operating life of the engine and for example, turbo compressor.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 15W-40 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,870 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,866 |
ASTM Color | ASTM D1500 | <3.0 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 98,08 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 14,95 |
Viscosity index | ASTM D2270 | 160 | |
Alkalinity | ASTM D2896 | mgKOH/g | 9,2 |
Open-cup flash point | ASTM D92 | °C | 218 |
Flow point | ASTM D97 | °C | -36 |
Specifications and approvals
- ACEA E7/E7|A3/B4-04 (2007)
- API CI-4/SL
- MB-Approval 228.3
- Volvo VDS-3
- CUMMINS CES 20076/77/78
- CAT ECF-2,
- MTU Type 2,
- Deutz DQC III-05
- Renault Truck RLD
- GLOBAL DHD-1,
- MAN M3275
- Mack EO-M Plus
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not pollute.
Utilize oil as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI 10W-40 SL - high-quality engine oil developed on the basis of highly-purified Group III base oils with lowered volatility and synthetic components. The oil is produced for gasoline and diesel automobiles and light trucks engines. The oil is perfectly suitable for the latest European and Japanese cars.
YOKKI 10W-40 SL is recommended for all types of diesel automobiles and light trucks with and without turbocharging where lower oil consumption and ultimate engine protection are required.
Low temperature properties of YOKKI 10W-40 SL make it especially suitable for different climatic zones: from hot up to cold ones.
ADVANTAGES
YOKKI 10W-40 SL provides easy cold start and excellent lubrication under all operating temperature conditions that allows increasing the engine operating life.
CHARACTERISTICS
YOKKI 10W-40 SL is characterized by splendid low temperature features providing easy start and good lubrication of the engine even under heavy frost conditions. It guarantees lubrication of the most sensitive parts of the engine and maximum wear reduction. The set of detergent additives is developed in order to prevent deposit formation on working surfaces of the engine. It provides cleanliness and therefore, long operating life of the engine and for example, turbo compressor.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 10W-40 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,865 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,856 |
ASTM Color | ASTM D1500 | <3.0 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 96.8 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 14.5 |
Viscosity index | ASTM D2270 | 155 | |
Alkalinity | ASTM D2896 | mgKOH/g | 7.6 |
Open-cup flash point | ASTM D92 | °C | 222 |
Flow point | ASTM D97 | °C | -30 |
Specifications and approvals
- API SL/CF
- JASO MA
- VW 505.00/501.01
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI 10W-40 SM is a high-quality engine oil developed on the basis of highly-purified Group III base oils with lowered volatility and synthetic components. This oil is produced for gasoline and diesel automobiles and light trucks engines. It is perfectly suitable for the most of European and Japanese automobiles.
YOKKI 10W-40 SM is recommended for all types of diesel automobiles and light trucks with and without turbocharging where lower oil consumption and ultimate engine protection are required.
Excellent low temperature viscosity properties of YOKKI 10W-40 SM make it especially suitable for different climatic zones: from hot up to cold ones. .
ADVANTAGES
YOKKI 10W-40 SM guarantees easy cold start and excellent lubrication under all operating temperature conditions that allows increasing the engine operating life.
CHARACTERISTICS
YOKKI 10W-40 SM is characterized by splendid low temperature features providing easy start and excellent lubrication of the engine even under very low temperature conditions. The product guarantees lubrication of the most sensitive parts of the engine and the best wear reduction. The set of detergent additives is developed in order to prevent deposit formation on the working surfaces of the engine. It provides cleanliness and therefore, long operating life of the engine and for example, turbo compressor
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 10W-40 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,862 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,852 |
ASTM Color | ASTM D1500 | <3.0 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 94.5 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 14.3 |
Viscosity index | ASTM D2270 | 156 | |
Alkalinity | ASTM D2896 | mgKOH/g | 7.6 |
Open-cup flash point | ASTM D92 | °C | 221 |
Flow point | ASTM D97 | °C | -36 |
Specifications and approvals
- API SM/CF
- ACEA A3/B3 /B4-04
- Mercedes Benz MB 229.1
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
Utilize oil as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI 15W-40 CI-4 – high-quality mineral motor oil specially developed for SHPD type diesel engines with and without turborcharging. This engine oil is used for overload heavy duty diesel engines under extreme conditions. Supports extended oil drain interval.
YOKKI 15W-40 CI-4 satisfies the most rigid requirements of engine manufacturers. This oil provides excellent engine lubrication under all operating conditions.
Low temperature viscosity properties, low volatility and therefore, flow of YOKKI 15W-40 CI-4, make it especially suitable for different climatic zones.
ADVANTAGES
YOKKI 15W-40 CI-4 provides excellent lubrication over a wide range of temperatures; it stands for easy cold start and extended operating life of the engine. The product can be used as all-purpose oil in a mixed fleet. Due to the outstanding carbon black diffusibility, it is especially recommended for EGR, DPF and CSR engines.
CHARACTERISTICS
YOKKI 15W-40 CI-4 is characterized by splendid low-temperature features providing easy cold start and improved post start-up protection of the engine. Low oil viscosity conduces to rapid rise of oil pressure under any temperature conditions. It guarantees excellent lubrication of the most sensitive parts of the engine and minimal wear reduction. The set of detergent additives is developed in order to prevent deposit formation on working surfaces of the engine. It provides cleanliness and thus, long operating life of the engine and for example, turbo compressor.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 15W-40 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,876 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,866 |
ASTM Color | ASTM D1500 | <3.0 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 100.9 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 14.3 |
Viscosity index | ASTM D2270 | 147 | |
Alkalinity | ASTM D2896 | mgKOH/g | 10 |
Open-cup flash point | ASTM D92 | °C | 222 |
Flow point | ASTM D97 | °C | -27 |
Specifications and approvals
API CI4/SL
ACEA E7/E5/A3 / B4 /
Mercedes-Benz 228.3/229.1
Mack EO-L / EO-M / EO-M Plus
VOLVO VDS 3
MAN 270 / 271 M3275
GLOBAL DHD-1
CUMMINS 20071 / 20072 / 20076 / 20077 / 20078
Conditions of storage and utilization
For intended purposes only. Do not contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
Utilize oil as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI 5W-30 CF - high-quality synthetic blend motor oil specially developed for DPF (Diesel Particular Filter) diesel engines with and without turbocharging. This oil is perfectly suitable for the latest diesel engines of most Japanese and European manufacturers of automobiles and light trucks.
YOKKI 5W-30 CF is recommended for diesel automobiles and light trucks with and without turbocharging where lower oil consumption and ultimate engine protection are required.
НLow temperature viscosity properties of YOKKI 5W-30 CF make it especially suitable for different climatic zones: from hot up to cold ones.
ADVANTAGES
YOKKI 5W-30 CF provides excellent lubrication under all operating temperature conditions. It stands for easy cold start and therefore longer operating life of the engine. «Low SAPs» technology (low sulphated ash, sulphur and phosphor) allows extending emission-gas control system operating life.
CHARACTERISTICS
YOKKI 5W-30 CF is characterized by splendid low temperature features providing easy cold start and good engine lubrication even under heavy frost conditions. Low oil viscosity conduces to rapid rise of oil pressure under any temperature conditions. It guarantees lubrication of the most sensitive parts of the engine and excellent wear reduction. The set of detergent additives is developed in order to prevent deposit formation on working surfaces of the engine. It provides cleanliness and therefore, longer engine and, for example, turbo compressor maintain peak performance.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 5W-30 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,860 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,850 |
ASTM Color | ASTM D1500 | <3.0 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 65.6 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 11.0 |
Viscosity index | ASTM D2270 | 160 | |
Alkalinity | ASTM D2896 | mgKOH/g | 7.6 |
Open-cup flash point | ASTM D92 | °C | 210 |
Flow point | ASTM D97 | °C | -36 |
Specifications and approvals
- API CF API SJ
- ACEA E2-96 Issue 5 ACEA A2-96/B2-98
- MB 228.1 MB 229.1 Volvo VDS
- MAN 271 MTU Level 1
Conditions of storage and utilization
For intended purposes only. Prevent contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI 5W-30 SL - high-quality motor oil formulated on the basis of highly-purified Group III base stocks with lowered volatility and synthetic components. The product is developed for gasoline and diesel passenger cars and light trucks engines, including latest European and Japanese vehicles.
YOKKI 5W-30 SL is recommended for all types of diesel automobiles and light trucks with and without turbocharging where lower oil consumption and ultimate engine protection are required.
Low temperature viscosity properties of YOKKI 5W-30 SL make it especially suitable for different climatic zones: from hot up to cold ones.
ADVANTAGES
YOKKI 5W-30 SL provides easy cold start and excellent lubrication under all operating temperature conditions. It allows increasing the operating life of the engine.
CHARACTERISTICS
YOKKI 5W-30 SL is characterized by splendid low temperature features providing easy cold start and good engine lubrication even under heavy frost conditions. Low oil viscosity conduces to rapid rise of oil pressure under very low temperature conditions. It guarantees perfect lubrication of the most sensitive parts of the engine and maximal wear reduction. The set of detergent additives is developed in order to prevent deposit formation on working surfaces of the engine. It provides cleanliness and thus, long operating life of the engine and for example, turbo compressor. Besides, YOKKI 5W-30 SL increases new generation catalytic agents life.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 5W-30 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,860 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,850 |
ASTM Color | ASTM D1500 | <2.5 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 66.4 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 11.1 |
Viscosity index | ASTM D2270 | 160 | |
Alkalinity | ASTM D2896 | mgKOH/g | 7.6 |
Open-cup flash point | ASTM D92 | °C | 212 |
Flow point | ASTM D97 | °C | -36 |
Specifications and approvals
- API SL/CF
- JASO MA
Conditions of storage and utilization
For intended purposes only. Prevent contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI 5W-30 SM ILSAC GF-4 – full synthetic engine oil developed to meet the latest automobile manufacturers requirements. It is suitable for gasoline and diesel engines. This oil fully meets «Euro 4» and «Mid SAPS» requirements. YOKKI 5W-30 satisfies the highest API ILSAC GF-4 standards and, in addition, reduces fuel consumption by 2, 5%.
YOKKI 5W-30 SM ILSAC GF-4 is recommended for diesel automobiles and light trucks with and without turbocharging where lower oil consumption and ultimate engine protection are required. Low temperature viscosity properties of YOKKI 5W-30 SM ILSAC GF-4 make it especially suitable for different climatic zones: from hot up to cold ones.
ADVANTAGES
YOKKI 5W-30 SM ILSAC GF-4 provides easy engine start under all operating temperature conditions. It allows increasing operating life of the engine.
CHARACTERISTICS
YOKKI 5W-30 SM ILSAC GF-4 is characterized by splendid low temperature features providing easy start and good lubrication of the engine even under heavy frost conditions. Low viscosity conduces to rapid rise of oil pressure even under very low temperature conditions. It guarantees excellent lubrication of the most sensitive parts of the engine and high wear reduction. Due to the synthetic base and specially developed additives set YOKKI 5W-30 SM ILSAC GF-4 keeps its excellent lubricating properties to protect the overload engine under extreme conditions. The set of detergent additives is developed in order to prevent deposit formation on working surfaces of the engine. It guarantees clean engine and long operating life of both engine and for example, turbo compressor. YOKKI 5W-30 SM ILSAC GF-4 is created in order to increase new generation catalytic agents life and prolong "Mid SAPS" system filter operating life. The oil exceeds the highest American standards for gasoline and LPG/CNG engines.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity | - | - | 5W-30 |
Density at @ 15°C | ASTM D4052 | g/ml | 0,850 |
Density at @ 30°C | ASTM D4052 | g/ml | 0,841 |
ASTM Color | ASTM D1500 | <2.5 | |
Appearance | Visual | - | B & C |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 62.4 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 10.8 |
Viscosity index | ASTM D2270 | 165 | |
Alkalinity | ASTM D2896 | mgKOH/g | 7.4 |
Open-cup flash point | ASTM D92 | °C | 214 |
Self-ignition point | ASTM E 659 | °C | 318 |
Flow point | ASTM D97 | °C | -42 |
Specifications and approvals
API SM ILSAC GF-4,
MB 229.51, BMW LL-04,
VW 502.00 / 505.00/505.01,
M111 FE > 2,5 %
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI ATF III H - transmission oil recommended for automatic and variable transmissions (CVT) where transmission fluids of ATF type are required. It conforms to most of the standards of Japanese and European automobile manufacturers and satisfies Dexron III 6297-M, Ford Mercon M2C185A, Allison C-4 requirements. This oil is also well suitable for some hydraulic transmissions, servo controlled mechanisms, hydraulic systems, etc.
YOKKI ATF III H is recommended for use in automatic transmissions of automobiles where oils of DX III type are required. It can be also used for mobile equipment of service companies where electrical properties of isolation for hydraulic oils are required. The product is also recommended for use in automatic transmissions and Subaru, Isuzu, Fiat, Mercedes Bens CVT.
ADVANTAGES
YOKKI ATF III H provides splendid thermal stability that guarantees high-capacity maintenance even under extreme operating conditions. Excellent oxidation stability of YOKKI ATF III allows increasing oil drain intervals. Operating characteristics and lubricant properties stay constant within a very wide-range of temperature span. Among other outstanding properties there are low volatility and non-aggressivity to all types of gaskets thickenings, etc.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
Density at @ 15°C | ASTM D4052 | kg/m3 | 0,853 |
Kinematic viscosity at @ 40°C | ASTM D445 | mm2/с | 36 |
Kinematic viscosity at @ 100°C | ASTM D445 | mm2/с | 7,6 |
Viscosity index | ASTM D2270 | 187 | |
Flow point | ASTM D97 | °C | -36 |
Open-cup flash point | ASTM D92 | °C | 194 |
Color | Visual | Red |
Specifications and approvals
Toyota T-III, Hyundai, Mitsubishi, Nissan PC, Ford Mercon M2C185A, DX III G, DX II D\E, ZF TL ML 03 D/9/04D/11B/14 A/17 C, Allison C4
Conditions of storage and utilization
Применять только по прямому назначению. Избегать контакта с кожей. При попадании на кожу тщательно промыть водой с мылом. Не сливать масло в канализацию, на землю. Подлежит утилизации как токсичные отходы. Хранить в местах, недоступных для детей.
APPLICATION
Yokki Synt Gear GL5 75W-90 – wide application transmission oil suitable for transmission mechanisms of vehicles, transmission gearboxes, back axels where the API GL-5 type oil is recommended. Can be also used for transmission gearboxes where the API GL-4 specification is recommended.
ADVANTAGES
Масло Yokki Synt Gear GL5 75W-90 high oxidation resistance guarantees increased operating capacity and oil drain interval. The product improves operating environment quality and safety even under extreme conditions; the oil is also good as energy conserving.
CHARACTERISTICS
Yokki Synt Gear GL5 75W-90 includes anticorrosive additives and possesses high oxidation in wide span of temperatures.
Yokki Synt Gear GL5 75W-90 provides minimal fuel consumption less and extended oil drain interval. It is used for hypoid gears. Special anti scratch additives (EP), included to the product, minimize temperature, wearing, pitting and provide excellent drive gear eve under extreme conditions. The oil is compatible with different types of gaskets. This oil is light colored, with a weak smell.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
SAE viscosity degree | SAE J 300 | 75 W-90 | |
Density at 15°C | ASTM D 4052 | kg/m3 | 0,858 |
Viscosity at 40°C | ASTM D 445 | mm2/с | 116 |
Viscosity at 100°C | ASTM D 445 | mm2/с | 15,4 |
Viscosity index | ASTM D 2270 | 139 | |
Flow point | ASTM D 97 | °C | -30 |
Open-cup flash point | ASTM D 92 | °C | 200 |
Color | Brown |
Specifications and approvals
API GL-5, API MT-1, MIL-PRF-2105E, Mack GO-J, PG-2, Limited Slip
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes to be washed thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI ATF MV - transmission oil developed on the synthetic base stock. Conforms to most of Japanese and Korean characteristics. The oil is recommended for automatic and powershift transmissions where transmission oils of ATF type are required. It can be used for Dexron IID or IIE transmissions. The oil is also suitable for some hydraulic transmissions, servo controlled mechanisms, hydraulic systems, etc.
YOKKI ATF MV - transmission oil is recommended for new generation automatic transmissions. It follows such characteristics as: ATF Dexron III H, Ford Mercon, Jaso 1A for Japanese vehicle, Allison C-4. It can be also used for CVT automobiles with engine volume not more than 2 liters.
YOKKI ATF MV satisfies the following OEMs: Toyota T-IV, (Aisin AW 3309), Kia, Hyundai, Mitsubishi SP III , Alfa Romeo, Volkswagen, Renaut и Chevolet that need fluid of Dexron III type for some models.
ADVANTAGES
YOKKI ATF MV benefits are: splendid friction characteristics along with increased operation period within the wide temperature range. Excellent oxidation stability, splendid cold flow and high thermal resistance of the oil increases reliability of the automatical transmission and its operating characteristics. The operating life and oil drain intervals are expanded.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
Density at @ 15°C | ASTM D4052 | kg/m3 | 0,8514 |
Viscosity at @ 40°C | ASTM D445 | mm2/с | 39,64 |
Viscosity at @ 100°C | ASTM D445 | mm2/с | 7,55 |
Viscosity index | ASTM D2270 | - | 161 |
Flow point | ASTM D97 | °C | -36 |
Open-cup flash point | ASTM D92 | °C | 198 |
Color | Red |
Meets the requirements:
GM DII D/E, Dexron III H, Ford Mercon III –V, Chrysler Mopar ATF+3/+4, Allison C-4 Voith G607 ,ZF TE-ML 14A, MB page 236.9, JASO 1A testing & Honda field test: Daihatsu, Honda, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota, Type A, Suffix A (TASA), PSF(except Honda), CVT (≤2.0 L engines)
Conditions of storage and utilization
For intended purposes only. Prevent contact with skin. If getting into eyes to be washed thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI CVT - transmission oil developed specially for continuously variable transmissions. Yokki CVT is produced on the basis of synthetic base stock with the set of special additives. It provides friction stability, excellent oxidation resistance, high antiwear properties and cold flow that are desirable for most of modern Jaso 1A automobiles. The product guarantees smooth operation of variable transmission and conduces to reduction of drive belts wearing. This oil satisfies the requirements of most of Japanese variable transmission manufacturers. It also suites well for some hydraulic transmissions, servo controlled mechanisms, hydraulic systems etc.
ADVANTAGES
YOKKI CVT
- Excellent flow index;
- High oxidation stability in addition to low corrosive activity;
- High aging resistance with increased oil drain interval;
- Good lubricating properties providing the reduction of a noise level and smooth operation of the equipment;
- Outstanding wear protection.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
Density at @ 15°C | ASTM D4052 | g/ml | 0.853 |
Open-cup flash point | ASTM D92 | °C | 195 |
Flow point | ASTM D97 | °C | -36 Max |
Kinematic viscosity at @ 40°C | ASTM D445 | cSt | 34.66 |
Kinematic viscosity at @ 100°C | ASTM D445 | cSt | 7.12 |
Viscosity index | ASTM D2270 | 174 | |
Color | Visual | 2.0 |
Отвечает требованиям:
Toyota (CVT), Honda (HMMF), Mitsubishi (CVT), Subaru (CVT), Suzuki—will introduce CVT, GM, Ford (CVT23, CVT28), Nissan (CVT)
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes to be washed thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI ELC is a super long-life ethylene-glicol tipe engine coolant. The antifreeze is perfect for heat transfer systems of all types of vehicles used in severe conditions as well as for internal combustion engines used in the industrial equipment.
The formula is developed specially for gasoline and diesel engines. A special technology provides maximum protection of the metals of the heat transfer systems, even aluminum and copper, from corrosions and prevents the heat transfer systems against freeze up to -45°С.
The antifreeze is fully ready for use.
YOKKI ELC antifreeze is created to meet the most hard requirements of new generation vehicles and is suitable for earlier-manufactured vehicles.
The range of concentration of the antifreeze YOKKI ELC provides optimal corrosion protection. YOKKI ELC is compatible with other brands of antifreezes based on ethylene-glycol. The set of additives going with this product allows preventing aggressive influence on hoses, plastic tubes and other materials used in heat transfer systems of the engine.
CHARACTERISTICS
5 year or 240 000 km service interval if no overheating of the engine and normal functioning of the heat transfer system.
YOKKI ELC antifreeze is compatible with conventional antifreezes, but mixing will reduce extended life benefits.
YOKKI ELC antifreeze approves outstanding heat transfer properties and excellent hot surface protection. YOKKI ELC antifreeze provides year-round protection of winter freeze up and summer boil over. Free from inhibitors based on amines, nitrites and phosphates.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
Color | Orange | ||
Freezing point | ASTM D 1177 | °C | - 46 |
Density at @15°C | ASTM D 4052 | kg/m3 | 1.07 |
Boiling point | ASTM D 1120 | °C | 109 |
Test of organic coatings' influence | ASTM D 1882 | no |
Specifications and approvals
GM 1825M
GM 1899
Ford WSE-M97BB44-A
Ford WSE-M97BB44-B
DaimlerChrysler MS 7170 and MS 9769
General Services Administration A-A-52624
ASTM D 3306
SAE J 1034
ASTM D 4895
KS M 2142
Conditions of storage and utilization
For intended purposes use only. Don't contact with skin. If getting into eyes to be washed thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI HYDRAULIC OIL HV 32 is developed for hydraulic systems operating under extreme conditions. The product excellently works over a wide range of temperatures: from north cold up to summer hot.
ADVANTAGES
Modern hydraulic systems make high demands on hydraulic liquids. YOKKI HYDRAULIC OIL HV 32 completely satisfies these requirements and even exceeds them. YOKKI HYDRAULIC OIL HV 32 provides filter problems disappearing and, by that, increasing the performance reliability of the system; also the oil drain interval grows when using the product.
CHARACTERISTICS
YOKKI HYDRAULIC OIL HV 32 is developed on the basis of highly refined mineral oils. The oil is free of ash-forming components. That is why there are no problems with filters during the operational process. The product provides exclusive wear protection that allows increasing the system components life.
Due to high viscosity index, extra offsetting and oil oxidation resistance YOKKI HYDRAULIC OIL HV 32 is perfect for different operational conditions during long periods of time. It prevents hydraulic systems from sludge accumulating and exhibits both excellent water segregation and air release properties. The oil also inhibits corrosion greatly.
YOKKI HYDRAULIC OIL HV 32 can be mixed with most of hydraulic liquids. The oil conforms to the standards and requirement of leading hydraulic systems manufacturers and even excels them.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
ISO viscosity degree | 32 | ||
Density at 15°С | ASTM D 4052 | kg/m3 | 0,8459 |
Viscosity at 40°С | ASTM D 445 | mm2/с | 33.25 |
Viscosity at 100°С | ASTM D 445 | mm2/с | 6.52 |
Viscosity at -20°С | ASTM D 445 | mm2/с | - |
Viscosity at -30°С | ASTM D 445 | mm2/с | 3650 |
Viscosity index | ASTM D 2270 | - | 154 |
Open-cup flash point | ASTM D 92 | °С | 202 |
Flow point | ASTM D 97 | °С | -36 |
Filterability | СЕТОР | мл/см2 | 104 |
FZG A/8 - 3/90 | CEC-L-07-A-95 | FLS | 11 |
Specifications and approvals
DIN 51524 HVLP, Vickers 35VQ-25A, Vickers V-104 C
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
Hydraulic oil YOKKI HYDRAULIC OIL HV 46 is specially developed for hydraulic systems operating under extreme conditions. The product excellently works under a wide range of temperatures from north winter up to hot summer.
ADVANTAGES
Modern hydraulic systems make high demands on hydraulic liquids.YOKKI HYDRAULIC OIL HV 46 completely satisfies these requirements. YOKKI HYDRAULIC OIL HV 46 provides filter problems disappearing. Because of that, the performance reliability of the system increases and the oil drain interval grows when using the product.
CHARACTERISTICS
YOKKI HYDRAULIC OIL HV 46 is developed on the basis of highly refined mineral oils. The oil is free of ash-forming components. That is why there are no problems with filters during the operational process. The product provides exclusive wear protection that allows increasing the system components life.
Due to the high viscosity index, extra offsetting and oil oxidation resistance, YOKKI HYDRAULIC OIL HV 46 has optimal viscosity for different operational conditions within long periods of time. It prevents hydraulic systems from accumulating of sludge and exhibits excellent water segregation and air release properties. The oil also inhibits corrosion greatly.
The oil YOKKI HYDRAULIC OIL HV 46 can be mixed with most of hydraulic liquids and, as tested, the oil conforms to the standards and requirement of leading hydraulic systems manufacturers and even excels them.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
ISO viscosity degree | 46 | ||
Density at 15°С | ASTM D 4052 | kg/m3 | 0,8536 |
Viscosity at 40°С | ASTM D 445 | mm2/с | 46.97 |
Viscosity at 100°С | ASTM D 445 | mm2/с | 8.23 |
Viscosity at -20°С | ASTM D 445 | mm2/с | 2400 |
Viscosity at -30°С | ASTM D 445 | mm2/с | - |
Viscosity index | ASTM D 2270 | - | 150 |
Open-cup flash point | ASTM D 92 | °С | 214 |
Flow point | ASTM D 97 | °С | -36 |
Filterability | СЕТОР | ml/sm2 | 104 |
FZG A/8 - 3/90 | CEC-L-07-A-95 | FLS | 12 |
Specifications and approvals
DIN 51524 HVLP, Vickers 35VQ-25A, Vickers V-104 C
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI ANTIFREEZE LLC is an extended operating life antifreeze based on ethylene glycol. The product prevents the heat transfer system against freeze up to -45°С.
The antifreeze is perfect for heat transfer systems of all types of vehicles used in severe conditions as well as for internal combustion engines used in the industrial equipment.
The formula is developed for gasoline and diesel engines. A special technology provides maximum protection of the metals of the heat transfer system, even aluminum, from corrosion.
The antifreeze is fully ready for use.
The range of concentration of the antifreeze YOKKI ANTIFREEZE LLC provides optimal corrosion protection. YOKKI ANTIFREEZE LLC is compatible with other antifreezes based on ethylene-glycol. The set of additives going with this product allows preventing aggressive influence on hoses, plastic tubes and other materials used in the engine heat transfer systems.
CHARACTERISTICS
3 years or 60 000 km service interval if no engine overheating, and normal operation of the cooling system.
YOKKI ANTIFREEZE LLC antifreeze is compatible with conventional antifreezes. However mixing with regular antifreezes will reduce the extended operating life.
YOKKI ANTIFREEZE LLC antifreeze approves excellent parameters heat transfer properties and outstanding hot surface protection. The antifreeze YOKKI ANTIFREEZE LLC provides koptimal all-year-round protection against winter freeze up and summer boil over.
Free of inhibitors based on amines, nitrites and phosphates.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
Density at 15°C | ASTM D4052 | kg/м3 | 1.10 |
Flow point | ASTM D-1177 | °C | ≤ - 45 |
Color | Visual | green | |
Boiling point, °C | Reflux | °C | 108 |
Specifications and approvals
Doosan Infra Core (Ex - Daewoo Heavy Industrial)
APPROVED
KS 2142
Approved: ASTM D3306
JIS
BS6580
Mitsubishi
Hyundai
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI ATF T-IV - transmission oil specially developed for automatic TOYOTA transmissions where transmission fluids of ATF type are required. The product satisfies most of Japanese and Korean manufacturers' requirements. This oil can be used for Dexron II or III type transmissions. It is also suitable for hydraulic transmissions, servo controlled mechanisms, hydraulic systems, etc.
YOKKI ATF T-IV is recommended for automatic TOYOTA transmissions of the new generation. This oil follows such characteristics as Jaso 1A and Allison C-4. It can be used in CVT of automobiles with displacement below 2 liters.
YOKKI ATF T-IV exceeds the OEMs: Toyota T-IV, (Aisin AW 3309), Kia, Hyundai, Mitsubishi SP III.
ADVANTAGES
YOKKI ATF T-IV possesses splendid friction characteristics by increased operating time at wide temperature range. This oil provides excellent oxidation resistance. Among the benefits of the product there are outstanding cold flow and high thermal stability, that increases reliability and operating characteristics of the automatic transmission. The operating life of the automatic transmission and oil drain intervals are expanded.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
Density at 15°C | ASTM D4052 | kg/m3 | 0,848 |
Viscosity at 40°C | ASTM D445 | mm2/с | 39,7 |
Viscosity at 100°C | ASTM D445 | mm2/с | 7,52 |
Viscosity index | ASTM D2270 | - | 160 |
Flow point | ASTM D97 | °C | -37 |
Open-cup flash point | ASTM D92 | °C | 200 |
Color | Red |
Specifications and approvals
TOYOTA T-IV manufacturing, Aisin AW 3309
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI ATF Z-1 – automatic transmission oil developed on mineral base stock with synthetic components. The product conforms to most of Japanese and Korean characteristics. It is recommended for Honda automatic transmissions where transmission fluids of ATF type, Z1 specification are required. The oil can be also used for older Dexron II or III transmissions. Te product is well suitable for some hydraulic transmissions, servo controlled mechanisms, hydraulic systems, etc (excluding Honda PSF).
YOKKI ATF Z-1 - transmission oil recommended for automatic transmissions of the new generation. It follows such characteristics as: Honda Z-1, Jaso 1A, Allison C-4. It can be used in CVT transmission engines with displacement below 2 litres.
YOKKI ATF Z-1 satisfies the OEMs: Honda Z-1, (Aisin AW 3309).
ADVANTAGES
YOKKI ATF Z-1 possesses excellent friction characteristics by the increased operating time at wide temperature range. This oil provides splendid oxidation resistance. Due to the outstanding cold flow and high thermal stability functional characteristics of the automatic transmission and its reliability are increased. The operating life and transmission oil drain intervals are expanded.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
Density at 15°C | ASTM D4052 | kg/m3 | 0,86 |
Viscosity at 40°C | ASTM D445 | mm2/с | 39,8 |
Viscosity at 100°C | ASTM D445 | mm2/с | 7,6 |
Viscosity index | ASTM D2270 | - | 161 |
Flow point | ASTM D97 | °C | -39 |
Open-cup flash point | ASTM D92 | °C | 200 |
Color | Red |
Specifications and approvals
Honda Z-1
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If getting into eyes wash them thoroughly with water and soap.
Do not return oil to canalization and into the ground.
To be utilized as toxic waste. Keep out of the reach of children.
APPLICATION
YOKKI ATF SP-3 - automatic transmission oil developed in accordance with the latest recommendations of the patented product. It fully meets the requirements of such companies as Mitsubishi, Hyundai for automatic transmissions and CVT. YOKKI ATF SP-3 is synthetic transmission oil produced by the ash-free technology; suitable for most of Japanese automobiles.Also YOKKI ATF SP-3 is acceptable for European vehicles.
YOKKI ATF SP-3 is recommended for automatic transmissions of automobiles that need oil of ATF SP-3 type. It is also suitable for some hydraulic transmissions, servo controlled mechanisms, hydraulic systems, etc.
ADVANTAGES
YOKKI ATF SP-3 possesses splendid functional characteristics at wide range of temperatures that guarantees improved capacity level under changing operating conditions. Excellent oxidation resistance of YOKKI ATF SP-3 allows increasing oil drain intervals. Operating characteristics and lubricating properties do not change within very wide temperature range. Among other benefits there are low volatility and non-aggressiveness to all types of gaskets, thickenings, etc.
CHARACTERISTICS | METHODS | UNITS | |
---|---|---|---|
Density at 15°C | ASTM D4052 | kg/m3 | 0,8484 |
Viscosity at 40°C | ASTM D445 | mm2/с | 39,7 |
Viscosity at 100°C | ASTM D445 | mm2/с | 7,52 |
Viscosity index | ASTM D2270 | - | 160 |
Flow point | ASTM D97 | °C | -36 |
Open-cup flash point | ASTM D92 | °C | 198 |
Color | Red |
Specifications and approvals
Mitsubishi, Hyundai Factory Fill Requirements (SP III)
Conditions of storage and utilization
For intended purposes only. Don't contact with skin. If product gets into eyes wash them thoroughly with water and soap.
Do not return oil to sewers and on the ground.
To be utilized as toxic waste. Keep out of the reach of children.